+86-29-89284429
://Bottle-Top Dispenser Features

Bottle-Top Dispenser Features

The Hawach Bottle-Top Dispenser is designed to meet the most stringent purity requirements in trace analysis. Special cleaning steps, practical application verification before trace analysis, to meet stringent non-polluting operating conditions. The raw materials used in the parts in contact with the medium are a variety of fluoroplastics. The release of trace metal content is controlled below the ppb level and can be controlled in the ppt range depending on the application. Excellent chemical resistance, especially for corrosive media, such as high concentration of acid and alkali, hydrogen peroxide, hydrofluoric acid and bromine modular structure is easy to disassemble, easy to clean or replace the distribution pipe.

It is suitable for the direct removal of corrosive reagents from bottles, including concentrated acids such as H3PO4, H2SO4, bases such as NaOH, KOH, salt solutions, and many organic solvents.

Features at a glance:
Use cursors for fast range settings. Calibration adjustments can be easily made using a random tool. A clear indicator automatically indicates if the instrument is factory set. The Hawach bottle-top dispenser is easy to remove and clean, and has an adjustable inlet valve for autoclaving at 121 °C.

Materials in contact with reagents: borosilicate glass, ceramic, platinum-rhodium alloy, ETFE, FEP, PFA and PP (drain tube safety cap).

Operation: Vapor pressure 500 mbar, viscosity 500 mm2/s, temperature 40 °C, liquid density 2.2 g/cm3.

2018-12-06T01:29:51+00:00December 6th, 2018|